Datasheet

ADS1258EVM-PDK Kit Operation

www.ti.com

2. Select ADS1258EVM from the EVM drop-down menu. The ADS1258EVM-PDK plug-in appears in the

left pane, as shown in Figure 14.

Figure 14. ADS1258EVM-PDK Plug-In Display Window

3. The ADS1258EVM-PDK plug-in window has a status area at the top of the screen. When the plug-in is

first loaded, the plug-in searches for the board. You will see a series of messages in the status area

indicating this action.

4. If you have not yet loaded the operating system drivers, Windows will display the Windows Install New

Driver Wizard sequence (illustrated in Figure 15 through Figure 19). Accept the default settings.

NOTE: During the driver installation, a message may appear indicating the firmware load has

TIMED OUT. Click OK and continue driver installation. The plug-in will attempt to download

the firmware again once the driver installation completes.

ADS1158EVM, ADS1258EVM, ADS1158EVM-PDK, and ADS1258EVM-PDK SBAU126C– May 2007– Revised May 2011

Submit Documentation Feedback