Datasheet

ADS1131
SBAS449C –JULY 2009–REVISED OCTOBER 2013 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE AND ORDERING INFORMATION
(1)
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the
device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
Over operating free-air temperature range, unless otherwise noted.
ADS1131 UNIT
AVDD to GND –0.3 to +6 V
DVDD to GND –0.3 to +6 V
100, momentary mA
Input current
10, continuous mA
Analog input voltage to GND –0.3 to AVDD + 0.3 V
Digital input voltage to GND –0.3 to DVDD + 0.3 V
Maximum junction temperature +150 °C
Operating temperature range –40 to +85 °C
Storage temperature range –60 to +150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated is not implied. Exposure to absolute-
maximum-rated conditions for extended periods may affect device reliability.
2 Submit Documentation Feedback Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: ADS1131