Datasheet

www.ti.com

ADS1115EVM-PDK Kit Operation

6.1 Installing the ADCPro Software

CAUTION

Do not connect the ADS1115EVM-PDK before installing the software on a

suitable PC. Failure to observe this caution may cause Microsoft Windows to

not recognize the ADS1115EVM-PDK as a connected device.

The latest software is available from the TI website at http://www.ti.com. Refer to the ADCPro User Guide

for instructions on installing and using ADCPro.

To install the ADS1115EVM-PDK plug-in, run the file: ads1115evm-pdk-plug-in-1.0.0.exe (1.0.0 is the

version number, and increments with software version releases). Double-click the file to run it; then follow

the instructions shown. You can also use the ADCPro Update Check feature to check for newer versions

of the ADS1115EVM-PDK plug-in, once you have installed a version of it.

Follow the on-screen prompts. Once the ADCPro plug-in installs, you will be prompted to install the Virtual

COM port driver as shown in Figure 2.

Figure 2. Virtual COM Port Installer

Press OK, and the screen shown in Figure 3 displays.

Figure 3. Virtual COM Port Setup

If you already have a TUSB3410 Virtual COM port driver installed on your system, select Cancel;

otherwise, press Setup and follow the on-screen prompts. You may be notified that the driver is not

digitally signed. If this occurs, select Continue Anyway and proceed.

SBAU157B–August 2009–Revised May 2011 ADS1015EVM, ADS1115EVM, ADS1015EVM-PDK, and ADS1115EVM-PDK

Submit Documentation Feedback