Datasheet

www.ti.com
PACKAGE/ORDERING INFORMATION
ABSOLUTE MAXIMUM RATINGS
(1)
NOTE:Markingtextdirectionindicatespin1.MarkingtextdependsonI Caddress;seePackageOptionAddendum.
2
BD0
V
IN-
6
V
DD
5
SDA
4
SCL
3
GND
2
V
IN+
1
BD1
V
IN-
6
V
DD
5
SDA
4
SCL
3
GND
2
V
IN+
1
I Caddress:1001000
2
I Caddress:1001001
2
ADS1000
SBAS357A – SEPTEMBER 2006 – REVISED OCTOBER 2007
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
For the most current package and ordering information, see the Package Option Addendum located at the end of
this datasheet or see the TI website at www.ti.com .
Over operating free-air temperature range (unless otherwise noted).
ADS1000 UNIT
V
DD
to GND – 0.3 to +6 V
Input Current (Momentary) 100 mA
Input Current (Continuous) 10 mA
Voltage to GND, V
IN+
, V
IN –
– 0.3 to V
DD
to +0.3 V
Voltage to GND, SDA, SCL – 0.5 to +6 V
Maximum Junction Temperature, T
J
+150 ° C
Operating Temperature – 40 to +125 ° C
Storage Temperature – 60 to +150 ° C
Lead Temperature (soldering, 10s) +300 ° C
(1) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute
maximum conditions for extended periods may affect device reliability.
PIN CONFIGURATIONS
2 Submit Documentation Feedback Copyright © 2006 – 2007, Texas Instruments Incorporated
Product Folder Link(s): ADS1000