Datasheet

ADC128D818
www.ti.com SNAS483E –FEBRUARY 2010–REVISED MARCH 2013
Bit Bit Name Read/Write Bit(s) Description
1: Mask the corresponding interrupt status from propagating to the interrupt
4 IN4 Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
5 IN5 Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
6 IN6 Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
7 IN7 Mask Read/Write
output pin, INT
MODE 2
1: Mask the corresponding interrupt status from propagating to the interrupt
0 IN0(+) & IN1(-) Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
1 IN3(+) & IN2(-) Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
2 IN4(+) & IN5(-) Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
3 IN7(+) & IN6(-) Mask Read/Write
output pin, INT
4 Reserved Read Only
5 Reserved Read Only
6 Reserved Read Only
1: Mask the corresponding interrupt status from propagating to the interrupt
7 Temperature Mask Read/Write
output pin, INT
MODE 3
1: Mask the corresponding interrupt status from propagating to the interrupt
0 IN0 Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
1 IN1 Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
2 IN2 Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
3 IN3 Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
4 IN4(+) & IN5(-) Mask Read/Write
output pin, INT
1: Mask the corresponding interrupt status from propagating to the interrupt
5 IN7(+) & IN6(-) Mask Read/Write
output pin, INT
6 Reserved Read Only
1: Mask the corresponding interrupt status from propagating to the interrupt
7 Temperature Mask Read/Write
output pin, INT
Conversion Rate Register — Address 07h
Default Value [7:0] = 0000_0000 binary
Bit Bit Name Read/Write Bit(s) Description
Controls the conversion rate:
0: Low Power Conversion Mode
1: Continuous Conversion Mode
0 Conversion Rate Read/Write
Note: This register must only be programmed when the device is in shutdown
mode, that is, when the 'START' bit of the 'Configuration Register' (address 00h)
= 0
1–7 Reserved Read Only
Copyright © 2010–2013, Texas Instruments Incorporated Submit Documentation Feedback 29
Product Folder Links: ADC128D818