Datasheet

ADC122S101
SNAS286D –MARCH 2005–REVISED MARCH 2013 www.ti.com
To keep noise out of the power supply, keep the output load capacitance as small as practical. If the load
capacitance is greater than 35 pF, use a 100 Ω series resistor at the ADC output, located as close to the ADC
output pin as practical. This will limit the charge and discharge current of the output capacitance and improve
noise performance.
20 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: ADC122S101