Datasheet

ADC10731, ADC10732, ADC10734, ADC10738
www.ti.com SNAS081D –MAY 1999–REVISED MARCH 2013
Note: If CS is low during power up of the power supply voltages (AV
+
and DV
+
) then CS needs to go high for t
CS(H)
.
The data output after the first conversion is not valid.
The ADC10732 and the ADC10734 are obsolete. Information shown for reference only.
Figure 36. ADC10732, ADC10734 and ADC10738 CS Low during Conversion
Note: If CS is low during power up of the power supply voltages (AV
+
and DV
+
) then CS needs to go high for t
CS(H)
.
The data output after the first conversion is not valid.
The ADC10731 is obsolete. Information shown for reference only.
Figure 37. ADC10731 Using CS to Delay Output of Data after a Conversion has Completed
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 17
Product Folder Links: ADC10731 ADC10732 ADC10734 ADC10738