Datasheet

IN1
IN4
MUX
T/H
SCLK
V
A
GND
CS
DIN
DOUT
CONTROL
LOGIC
10-Bit
SUCCESSIVE
APPROXIMATION
ADC
.
.
.
GND
ADC104S051
SNAS253G –NOVEMBER 2004–REVISED MARCH 2013 www.ti.com
Block Diagram
PIN DESCRIPTIONS and EQUIVALENT CIRCUITS
Pin No. Symbol Description
ANALOG I/O
4-7 IN1 to IN4 Analog inputs. These signals can range from 0V to V
A
.
DIGITAL I/O
10 SCLK Digital clock input. This clock directly controls the conversion and readout processes.
Digital data output. The output samples are clocked out of this pin on falling edges of the
9 DOUT
SCLK pin.
Digital data input. The ADC104S051's Control Register is loaded through this pin on rising
8 DIN
edges of the SCLK pin.
Chip select. On the falling edge of CS, a conversion process begins. Conversions continue
1 CS
as long as CS is held low.
POWER SUPPLY
Positive supply pin. This pin should be connected to a quiet +2.7V to +5.25V source and
2 V
A
bypassed to GND with a 1 µF capacitor and a 0.1 µF monolithic capacitor located within 1
cm of the power pin.
3 GND The ground return for the supply and signals.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
2 Submit Documentation Feedback Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: ADC104S051