Datasheet

ADC10061, ADC10062, ADC10064
SNAS069E –JUNE 1999–REVISED MARCH 2013 www.ti.com
Absolute Maximum Ratings
(1)(2)(3)
Supply Voltage (V
+
= AV
CC
= DV
CC
) −0.3V to +6V
Voltage at Any Input or Output −0.3V to V
+
+ 0.3V
Input Current at Any Pin
(4)
5 mA
Package Input Current
(4)
20 mA
Power Consumption
(5)
875 mW
ESD Susceptibility
(6)
2000V
Vapor Phase (60 Sec) 215°C
Soldering Information
Infrared (15 Sec) 220°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional. These ratings do not ensure specific performance limits, however. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance
characteristics may degrade when the device is not operated under the listed test conditions.
(2) All voltages are measured with respect to GND, unless otherwise specified.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(4) When the input voltage (V
IN
) at any pin exceeds the power supply rails (V
IN
< GND or V
IN
> V
+
) the absolute value of current at that pin
should be limited to 5 mA or less. The 20 mA package input current limits the number of pins that can safely exceed the power supplies
with an input current of 5 mA to four.
(5) The maximum power dissipation must be derated at elevated temperatures and is dictated by T
JMAX
, θ
JA
and the ambient temperature,
T
A
. The maximum allowable power dissipation at any temperature is P
D
= (T
JMAX
− T
A
)/θ
JA
or the number given in the Absolute
Maximum Ratings, whichever is lower. In most cases, the maximum derated power dissipation will be reached only during fault
conditions. For these devices, T
JMAX
for a board-mounted device are as indicated in Package Thermal Resistance.
(6) Human body model, 100 pF discharged through a 1.5 kΩ resistor.
Operating Ratings
(1)(2)
T
MIN
≤ T
A
≤ T
MAX
=
Temperature Range
−40°C ≤ T
A
≤ +85°C
Supply Voltage Range +4.5V to +5.5V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional. These ratings do not ensure specific performance limits, however. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance
characteristics may degrade when the device is not operated under the listed test conditions.
(2) All voltages are measured with respect to GND, unless otherwise specified.
Package Thermal Resistance
Device θ
JA
(°C/W)
ADC10061CIWM 85
ADC10062CIWM 82
ADC10064CIWM 78
Converter Characteristics
The following specifications apply for V
+
= +5V, V
REF(+)
= +5V, V
REF(−)
= GND, and Speed Adjust pin unconnected unless
otherwise specified. Boldface limits apply for T
A
= T
J
= T
Min
to T
Max
; all other limits T
A
= T
J
= +25°C.
Units
Symbol Parameter Conditions Typical
(1)
Limit
(2)
(Limit)
Resolution 10 Bits
Integral Linearity Error R
SA
= 18 kΩ ±0.5 ±1.0/±1.5 LSB (max)
Offset Error ±1.5 LSB (max)
Full-Scale Error ±1 LSB (max)
Total Unadjusted Error All Suffixes, R
SA
= 18 kΩ ±0.5 ±1.5/±2.2 LSB (max)
Missing Codes] 0 (max)
(1) Typical numbers are at +25°C and represent must likely parametric norm.
(2) Limits are specified to TI's AOQL (Average Outgoing Quality Level).
4 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: ADC10061 ADC10062 ADC10064