Datasheet

ADC08200
SNAS136M –APRIL 2001–REVISED MARCH 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)(3)
Supply Voltage (V
A
) 3.8V
Driver Supply Voltage (V
DR
) V
A
+0.3V
Voltage on Any Input or Output Pin −0.3V to V
A
Reference Voltage (V
RT
, V
RB
) V
A
to AGND
CLK, PD Voltage Range −0.05V to
(V
A
+ 0.05V)
Input Current at Any Pin
(4)
±25 mA
Package Input Current
(4)
±50 mA
Power Dissipation at T
A
= 25°C See
(5)
ESD Susceptibility
(6)
Human Body Model 2500V
Machine Model 200V
Soldering Temperature, Infrared,
10 seconds
(7)
235°C
Storage Temperature −65°C to +150°C
(1) All voltages are measured with respect to GND = AGND = DR GND = 0V, unless otherwise specified.
(2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(4) When the input voltage at any pin exceeds the power supplies (that is, less than AGND or DR GND, or greater than V
A
or V
DR
), the
current at that pin should be limited to 25 mA. The 50 mA maximum package input current rating limits the number of pins that can
safely exceed the power supplies with an input current of 25 mA to two.
(5) The absolute maximum junction temperature (T
J
max) for this device is 150°C. The maximum allowable power dissipation is dictated by
T
J
max, the junction-to-ambient thermal resistance (θ
JA
), and the ambient temperature (T
A
), and can be calculated using the formula
P
D
MAX = (T
J
max − T
A
) / θ
JA
. The values for maximum power dissipation listed above will be reached only when this device is operated
in a severe fault condition (e.g., when input or output pins are driven beyond the power supply voltages, or the power supply polarity is
reversed). Obviously, such conditions should always be avoided.
(6) Human body model is 100 pF capacitor discharged through a 1.5 kΩ resistor. Machine model is 220 pF discharged through ZERO
Ohms.
(7) See AN-450, “Surface Mounting Methods and Their Effect on Product Reliability” (SNOA742).
Operating Ratings
(1)(2)
Operating Temperature Range −40°C ≤ T
A
≤ +105°C
Supply Voltage (V
A
) +2.7V to +3.6V
Driver Supply Voltage (V
DR
) +2.4V to V
A
Ground Difference |GND - DR GND| 0V to 300 mV
Upper Reference Voltage (V
RT
) 0.5V to (V
A
−0.3V)
Lower Reference Voltage (V
RB
) 0V to (V
RT
−0.5V)
V
IN
Voltage Range V
RB
to V
RT
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(2) All voltages are measured with respect to GND = AGND = DR GND = 0V, unless otherwise specified.
Package Thermal Resistance
Package θ
JA
24-Lead TSSOP 92°C/W
4 Submit Documentation Feedback Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: ADC08200