Datasheet

SNAU133
1.1 Features
 Demonstrates the ADC0XD1520's typical dynamic performance – see the datasheet for full details.
 Dual channel sample rates of up to 1.5 GS/s (limited by the ADC specifications and the FPGA capture
limitations)
 Single channel (Interleaved) sample rates of up to 3.0 GS/s (limited by the ADC specifications and the
FPGA capture limitations)
 FMC Expansion Header for streaming data capture
 External Hardware Trigger
 Updated Status LEDs
 On-board LMX2541 based clock circuit with a connector for a selectable external clock
 A complete high-performance low-noise power management section for the ADC, clock circuit, FPGA and
USB controller
 Single +12V power adapter input
 Simplicity and performance of USB 2.0 connection to the PC
 Functions with TI's latest WaveVision 5 signal-path control and analysis software
1.2 Packing List
The ADC0XD1520RB kit consists of the following components:
• ADC0XD1520RB Reference Board
• Documentation on CD Including
o ADC0XD1520RB Users Guide (this document)
o Wavevision 5 Software
o ADC0XD1520RB schematic & layout
o ADC0XD1520RB bill of materials
o ADC0XD1520RB performance plots
o FPGA source code
o Balun datasheets
• Hardware Kit Including
o 110V-240V AC to +12V DC Power Adapter
o USB cable
o 4 – DC blocks
o 2 – 50Ω terminators
o 1 – ADC-Low Distortion-Balun Board (useful bandwidth of 400 MHz to 3 GHz)
o 1 – ADC-Wide Band-Balun Board (useful bandwidth of 4.5 MHz to 3 GHz)
o 4 – 6” SMA cables
1.3 References
• *ADC0XD1520 datasheet
• *LMX2541 datasheet
*Note: Please refer to www.ti.com for the latest edition of all datasheets / application notes.