User's Manual

8. Basic ISO/IEC 15693 Software Commands

The host software allows data to be viewed and programmed in hexadecimal

format. Executing the following commands in order will help you familiarize

yourself with the software interface. Sample output can be seen in the graphic on

the following page.

Note:

Be sure the “ISO/IEC 15693” tab (under the “Go” button) is selected.

For information regarding the ISO/IEC 14443 tab, consult the User’s

Guide.

Identify All Cards in field:

1. Place one or more badges in the read field.

2. Select “Identify All Cards” to display the UID number of each badge in the

field.

3. Click “Go”.

View One Block of data on card:

1. Place a badge in the read field.

2. Select “View One Block” and enter the desired block number in the block

number field.

3. Click “Go”.

Program One Block of data on card:

1. Place a badge in the read field.

2. Select “Program One Block”

3. Enter the desired block number and the data to be entered in the

appropriate fields.

4. Click “Go”.

5. Repeat the “View One Block” process to verify that data has been written.

Note:

The badges included with th is kit have encrypted data pre-

programmed into blocks 0-4, which demonstrates the customizable

functionality of the Wiegand card data output mode. To avoid

destroying this data, do not reprogram blocks 0-4.

View Many Blocks of data at once:

1. Place a badge in the read field.

2. Select “View Many Blocks”

3. Enter the desired number of consecutive blocks (up to 32 blocks), and the

starting block in the appropriate fields.

4. Click “Go”.

* Information submitted for FCC, Industry Canada,

RTTE, CE & ETL certification: A92ACS6410 &

A92ACS6420 *