User's Manual

17. Regulations

The S6400 system comprises a RF transmission device, and is therefore subject to

national and international regulations. TI has obtained approvals from approval

authorities in a number of countries and is continuing to apply for approvals in

further countries. Actual status can be advised by customer support. In countries

where approval has not been obtained, this system may be operated only under an

experimental license issued by the relevant approval authority and must not be

marketed. Before any such device or system can be marketed, an equipment

authorization must be obtained from the relevant approval authority.

FCC Notices (U.S.A.)

This equipment has been tested and found to comply with the limits for a Class A

digital device and intentional radiator, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the

interference at his/her expense.

Modifications to this device shall not be made without the written consent of Texas

Instruments Incorporated. Unauthorized modifications may void the authority

granted under Federal Communications Commission Rules permitting the operation

of this device.

CE Conformity (Europe)

A CE Declaration of Conformity is available for this system through customer

support. Any device or system incorporating the S6400 reader system, in full or in

part, in any other than the originally tested configuration needs to be verified against

the European EMC directive. The System Integrator or user of such a system prior

to marketing and operating it in European Community must issue a separate

Declaration of Conformity.

For more information regarding regulations and endorsements, including CE, ETL,

and FCC, please contact technical support directly.

* Information submitted for FCC, Industry Canada,

RTTE, CE & ETL certification: A92ACS6410 &

A92ACS6420 *