User Manual

64 Using Press-to-Test
Bringing a Calculator Out of Test Mode
You can re-enable all disabled calculator files by using one of the following methods:
• Link two TI-84 Plus CE graphing calculators using a unit-to-unit USB cable and then
transfer a file by using y 8, SEND RECEIVE
-or-
• Use the TI TestGuard™ App re-enable feature.
Notes:
To clear a calculator of files created during an exam, use the following two-step
process:
If you do not need to clear files, use step 2 below:
1. Reset calculator files.
a) Turn off the calculator while in test mode.
b) "Re-Press-to-Test" - press and hold down the ~, |, and É keys, and then
release.
c) Select OK when you see the Reset Verification Screen. The calculator is now
"clean."
2. Re-enable files to turn off test mode.
a) Link two TI-84 Plus CE graphing calculators using a unit-to-unit USB cable.
b) Send a file to bring the calculator(s) out of test mode.
Tip: To preserve battery life, take your calculator out of Press-to-Test mode after the
exam.