User's Manual

Terminal Technician Making Initial E.S.P. Unit Readings
BIB TRACK ESP Unit User Guide3.doc 09/02/02 Page 9 of 70
Matching Fleet Vehicle IDs and Sensor IDs with E.S.P. Unit
Use this procedure to match the Fleet Vehicle ID painted on the side of a vehicle with
the electronic sensor ID of the sensor mounted on the vehicle. You must match these
two IDs before you can inspect tires.
1. Call up the Main Menu.
MAIN MENU
1: Action Menu
2: Send/Rec Data
3: Erase Data
4: Version
5: Read Sensor
Main Menu
2. Use the keypad Up and Down arrows to highlight the Action Menu option.
3. Press the Enter key.
SELECTED FLEET
Current Fleet:
Fleet 1
Current Terminal
Terminal 1
Selected Fleet Screen
4. Watch closely and check the Selected Fleet screen to verify that the E.S.P. Unit is
set to the correct fleet and terminal. If the E.S.P. Unit is not, use the procedure
"Changing Fleet on E.S.P. Unit".
After briefly appearing, the Selected Fleet screen disappears and the Action
Menu appears.
ACTION MENU
1: Add New Tires
2: Inspect & Mount
3: Dismount Tire
4: Repair Menu
5: Retread Menu
6: Dispose Tire
7: Ship/Receive
8: In Inventory
9: Match Vehicle
0: Change Fleet
Action Menu
5. Use the Up and Down arrows to highlight Match Vehicle.