User's Manual

Terminal Technician Making Initial E.S.P. Unit Readings
02.09.02 Page 50 of 70
Receiving Tires from Retread with E.S.P. Unit
Use this procedure to receive a tire from a retread vendor.
Scanning the Tire
1. Turn on the E.S.P. Unit with its On/Off key. If you see a menu other than the Main
Menu on the E.S.P. Unit screen, press the CLR (Clear) key until the Main Menu
appears.
MAIN MENU
1: Action Menu
2: Send/Rec Data
3: Erase Data
4: Version
5: Read Sensor
Main Menu
2. Use the keypad Up and Down arrows to highlight the Action Menu option.
3. Press the Enter key to call up the Action Menu.
ACTION MENU
1: Add New Tires
2: Inspect & Mount
3: Dismount Tire
4: Repair Menu
5: Retread Menu
6: Dispose Tire
7: Ship/Receive
8: In Inventory
9: Match Vehicle
0: Change Fleet
Action Menu
4. Use the Up and Down arrows to highlight the Retread Menu option.
6. Press Enter to call up the Retread Menu.
RETREAD
1: Send to Retread
2: Receive Retread
9: Back
Retread Menu