User's Manual

Terminal Technician Using the E.S.P. Unit Communicator Program
BIB TRACK ESP Unit User Guide3.doc 09/02/02 Page 5 of 70
4. Click the OK button.
NOTE: The Communicator will use on-screen messages to guide you through
the download process and to notify you if data transfer was successful.
5. Place the E.S.P. Unit in its cradle, which is connected to the BIB TRACK
computer.
6. Press the E.S.P. Unit's On/Off key to power up the unit.
7. If you see a menu other than the Main Menu on the E.S.P. Unit's screen, press
the CLR (Clear) key until you see the Main Menu.
MAIN MENU
1: Action Menu
2: Send/Rec Data
3: Erase Data
4: Version
5: Read Sensor
Main Menu
8. Use the Up and Down arrows on the E.S.P. Unit's keypad to highlight item 2:
Send/Rec Data.
9. Press the Enter key to start the transfer of data. The program will notify you if
data transfer was successful.