User's Manual

Terminal Technician Using the E.S.P. Unit Communicator Program
BIB TRACK ESP Unit User Guide3.doc 09/02/02 Page 4 of 70
Downloading Data to E.S.P. Unit
You are required to download data from your BIB TRACK computer to your E.S.P. Unit
at the start of every workday to assure that the data you use is up-to-date.
This downloaded data includes current information about users, terminals, vendors, tire
types, tire positions and vehicles. The data also includes updated codes:
• Condition Codes used when inspecting tires
• Damage or Failure Codes used when dismounting tires
• Repair Codes used when receiving a tire from repair
•
Retread Reason Codes used when sending a tire to retread
• Retread Design Codes used when receiving a retreaded tire
• RAR (Returned as Received) Codes used when receiving un-repaired or un-
retreaded tires
• Scrap Reason Codes used when disposing of a tire
To download data to the E.S.P. Unit, you need the Communicator program, the E.S.P.
Unit, and the E.S.P. Unit Cradle.
1. Call up the Communicator opening screen on your BIB TRACK computer.
Communicator Opening Screen
2. Click the Communicator arrow that designates Send Data to E.S.P. The Log-In box
will appear.
Log-In Box
3. Key in your User ID and Password.