User's Manual

Terminal Technician Making Initial E.S.P. Unit Readings
BIB TRACK ESP Unit User Guide3.doc 09/02/02 Page 14 of 70
15. Key in the tread depth in 1/32 of an inch then press Enter to call up the Tire
Condition screen.
TIRE INSPECTION
Tread Depth: 17
Tire Condition OK?
(Y/N)
Y = Tire is OK
N = Enter Condition
Code
Tire Condition Screen
16. Visually inspect the tire:
• Press Y if the tire condition is acceptable. The Tire Comments screen will
appear. See the procedure later in this section Entering Inspection Comments.
• Press N if the tire condition is unacceptable and you need to enter a Condition
Code. See the next procedure, Entering a Condition Code, for details.
Entering a Condition Code
1. To enter a Condition Code for an unacceptable tire, press N on the Tire Condition
screen.
TIRE INSPECTION
Tread Depth: 17
Tire Condition OK?
(Y/N)
Y = Tire is OK
N = Enter Condition
Code
Tire Condition Screen
2. When the Condition Code Search screen appears:
• Press Y to search by code.
• Press N to search by description.
CONDITION CODE
Search by code? Y/N
Y = by code
N = by description
Condition Code Search Screen