Installation Manual

Chapter 5: Configuration with web interface
98-169085-B Advanced settings 78
Advanced settings
Passwords
The EXPLORER 323 web interface is password protected at two levels: A user password and an
administrator password. You will always be prompted for a password when you access the web
interface. Default settings are:
• User: User name: user, Password: <serial number of the EXPLORER 323>
• Administrator: User name: administrator, Password: admin
You can change the passwords if you are logged in as administrator, see the next sections.
To log in as administrator
Access to the Advanced settings requires an administrator password. If you are already logged
in as user and you want to access the Advanced settings, do as follows:
1. From the Control panel
, select Advanced.
If you are not logged in as administrator you are now prompted to log in.
2. Enter the administrator password.
If you have forgotten the administrator password, you can reset the password. For details,
see To reset the administrator password on page 76. The old user name and password will
apply until you have finished the reset procedure.
3. Click OK.
To change the user password
To change the user password, do as follows:
1. Log in as administrator.
2. Under Advanced, select Passwords.
3. Select Change user password.
4. Type in the User id (default: user).
5. Type in the New password and retype it on the next line.
6. Click Save.
At the next login the new password is required.
Important
Change the administrator password immediately after first login!