Installation Manual

Chapter 5: Configuration with web interface
98-169085-B To manage connected devices (Traffic control) 72
To block or allow BGAN traffic or edit the name for a device
1. In the Traffic control page, click the device you want to set up.
The page shows the name, MAC address, IP address and traffic rule for the device.
2. Select Block BGAN traffic, if you want to deny access to the BGAN network for the
selected device.
If you want to allow access, clear the box. The selected device will then be able to access
the network, even if it is blocked in the default settings (see previous section).
3. At Name, type in the name you want for your device.
4. Click Save.
Reset to default: You can reset the settings for the device to the default settings.
• If the device is connected and you click the button Reset to default, the traffic rules will
be reset to the default values set in the previous section, but the name remains the same.
• If the device is not connected and you click the button Reset to default, the device is
removed from the list.
To Add a device
When you connect a device, it is automatically added to the list using the default settings. If
you want to add a device for later use, do as follows:
1. In the Devices page, click the Add device button.
2. Type in the Name and the MAC address for the device.
3. Select Block BGAN traffic, if you want to deny access to BGAN network for the selected
device.
If you want to allow access, clear the box. The device will then be able to access the
network, even if it is blocked in the default settings (see previous section).
4. Click Save.
When the device with this MAC address is connected, it will appear with the entered name in
the list, and access will be allowed or denied depending on the setting in this page.