Installation Manual
Table Of Contents
- Safety summary
- About this manual
- Introduction to EXPLORER 323
- To install the system
- To get started
- Before you start
- To switch on the EXPLORER 323
- To connect to the LAN interface
- To connect your WLAN-enabled device
- The EXPLORER Connect app
- To access the web interface
- To enter the SIM PIN for the terminal
- To register with the BGAN network
- Mounting calibration
- To start and stop data connections
- To make phone calls over BGAN
- To use the EXPLORER 323
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages
- Multiple data connections
- Status information
- The Control panel
- To use the logs
- Terminal settings
- To set up the interfaces
- To manage VoIP phones or smartphones (Not M2M)
- Advanced LAN
- To manage connected devices (Traffic control)
- To set up tracking and location reporting
- Support features
- Advanced settings
- Passwords
- To set up user permissions
- To restore factory settings
- SIM PIN for BGAN
- To save or load a configuration
- Connection watchdog (Link monitoring)
- Terminal watchdog
- Data limits
- Call charges
- Remote management
- Remote control of tracking
- Power save
- To configure data connection types and filters
- Help desk
- Reset button
- Security
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Specifications
- Command reference
- Conformity
- Glossary
- Index
98-169085-B Tools for setup and use 28
Chapter 4
To use the EXPLORER 323
4
This chapter describes how to use the EXPLORER 323. It has the following sections:
• Tools for setup and use
• Data connection with computer, smartphone or tablet
• To control data connections
• Power mode functions
• To access the terminal from a remote location
• To make phone calls over BGAN (not M2M version)
• Tracking and location reporting
Tools for setup and use
The web interface is a built-in web interface for easy configuration. The web interface is
accessed from a computer connected to the EXPLORER 323, using an Internet browser. No
installation of software is needed on the computer. For further information on the web
interface, see Configuration with web interface on page 43.
A smartphone app, EXPLORER Connect, is also available for iPhone and for Android
phones. The app includes a Satellite phone function that enables you to make calls to and
from your smartphone over the satellite network using the EXPLORER 323 terminal (not M2M
subscriptions). It also includes the complete feature set from the built-in web interface of the
terminal, allowing you to set up and use the terminal with your smartphone.
With AT commands you can configure and control the EXPLORER 323 from a computer
using a Telnet session, or from connected equipment, e.g. in M2M applications. For further
details see To access the terminal using AT commands on page 33 and Appendix B,
Command reference.
With SMS commands you can configure and control the EXPLORER 323 remotely. For
details, see Remote access with SMS on page 37 and Appendix B, Command reference.
The distributors may have their own Graphical User Interface, which could be built on e.g.
Inmarsat's M2M API (M2MAP) or similar. Contact your distributor for information.