Installation Manual
Table Of Contents
- Safety summary
- About this manual
- Introduction to EXPLORER 323
- To install the system
- To get started
- Before you start
- To switch on the EXPLORER 323
- To connect to the LAN interface
- To connect your WLAN-enabled device
- The EXPLORER Connect app
- To access the web interface
- To enter the SIM PIN for the terminal
- To register with the BGAN network
- Mounting calibration
- To start and stop data connections
- To make phone calls over BGAN
- To use the EXPLORER 323
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages
- Multiple data connections
- Status information
- The Control panel
- To use the logs
- Terminal settings
- To set up the interfaces
- To manage VoIP phones or smartphones (Not M2M)
- Advanced LAN
- To manage connected devices (Traffic control)
- To set up tracking and location reporting
- Support features
- Advanced settings
- Passwords
- To set up user permissions
- To restore factory settings
- SIM PIN for BGAN
- To save or load a configuration
- Connection watchdog (Link monitoring)
- Terminal watchdog
- Data limits
- Call charges
- Remote management
- Remote control of tracking
- Power save
- To configure data connection types and filters
- Help desk
- Reset button
- Security
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Specifications
- Command reference
- Conformity
- Glossary
- Index
Appendix B: Command reference
98-169085-B AT commands 128
ATCO response codes
The following response codes apply to the AT commands supported by SMS.
Code Text Explanation
General codes
0 Complete Operation completed successfully.
1 Unexpected software error Software error.
2 Local file open error _IGETFILE: could not open local file after download.
_ISENDFILE: could not open local file.
_IUPDCFG: Loading configuration failed. Incompatible file
format.
3 Directory not found Could not find specified directory on local file system.
4 File not found Could not find specified file name on local file system.
5 Error renaming file Could not restore after failed upgrade.
Context Management codes
13 Context activation error Context activation failed. Could be problem with PS attach,
SIM subscription, APN, network or connectivity.
FTP Management codes
20 FTP hookup fail Connection to FTP server failed. Problem could be server
unreachable or specified IP address or server name invalid, or
connectivity failure.
21 FTP login fail FTP user name or password incorrect.
23 FTP ‘cwd’ fail Could not change to working directory on FTP server.
24 FTP data connection fail Could not establish an FTP data connection with the server.
26 FTP xfer command fail Could not initiate data transfer on an established connection.
May be caused if filename not found.
29 FTP socket fail Error while reading or writing FTP data socket.
31 FTP xfer timed out FTP client timed out waiting for socket ready (read or write),
e.g. due to loss of connectivity during transfer.
_IGETFW command codes
40 File in use, cannot download The file to be downloaded is the same as the image currently
in use.
41 Starting immediate upgrade… Normal success. File downloaded successfully, now starting
immediate update.