Installation Manual
Table Of Contents
- Safety summary
- About this manual
- Introduction to EXPLORER 323
- To install the system
- To get started
- Before you start
- To switch on the EXPLORER 323
- To connect to the LAN interface
- To connect your WLAN-enabled device
- The EXPLORER Connect app
- To access the web interface
- To enter the SIM PIN for the terminal
- To register with the BGAN network
- Mounting calibration
- To start and stop data connections
- To make phone calls over BGAN
- To use the EXPLORER 323
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages
- Multiple data connections
- Status information
- The Control panel
- To use the logs
- Terminal settings
- To set up the interfaces
- To manage VoIP phones or smartphones (Not M2M)
- Advanced LAN
- To manage connected devices (Traffic control)
- To set up tracking and location reporting
- Support features
- Advanced settings
- Passwords
- To set up user permissions
- To restore factory settings
- SIM PIN for BGAN
- To save or load a configuration
- Connection watchdog (Link monitoring)
- Terminal watchdog
- Data limits
- Call charges
- Remote management
- Remote control of tracking
- Power save
- To configure data connection types and filters
- Help desk
- Reset button
- Security
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Specifications
- Command reference
- Conformity
- Glossary
- Index
Chapter 6: Maintenance and troubleshooting
98-169085-B Maintenance 104
Maintenance
Cleaning the EXPLORER 323
Clean the exterior of the EXPLORER 323 with a damp cloth.
Disposal of the EXPLORER 323
Old electrical and electronic equipment marked with this symbol can contain
substances hazardous to human beings and the environment. Never dispose these
items together with unsorted municipal waste (household waste). In order to
protect the environment and ensure the correct recycling of old equipment as well
as the re-utilization of individual components, use either public collection or
private collection by the local distributor of old electrical and electronic equipment marked
with this symbol.
Contact the local distributor for information about what type of return system to use.
Push and hold the Reset
button for > 10 seconds
The EXPLORER 323 restores factory settings and restarts the
system. All changes to the configuration are lost.
While the EXPLORER 323 is
booting, push and hold the
Reset button
The EXPLORER 323 enters safe mode.
Action Function
CAUTION! Do not spray water directly on the EXPLORER 323 with high pressure!
The EXPLORER 323 can be washed gently, but it is not designed to be exposed to
high pressure water-jets. The EXPLORER 323 is IP66.