Installation Manual
Table Of Contents
- Safety summary
- About this manual
- Introduction to EXPLORER 323
- To install the system
- To get started
- Before you start
- To switch on the EXPLORER 323
- To connect to the LAN interface
- To connect your WLAN-enabled device
- The EXPLORER Connect app
- To access the web interface
- To enter the SIM PIN for the terminal
- To register with the BGAN network
- Mounting calibration
- To start and stop data connections
- To make phone calls over BGAN
- To use the EXPLORER 323
- Configuration with web interface
- The web interface
- To control data connections from web interface
- To set up your data connection packages
- Multiple data connections
- Status information
- The Control panel
- To use the logs
- Terminal settings
- To set up the interfaces
- To manage VoIP phones or smartphones (Not M2M)
- Advanced LAN
- To manage connected devices (Traffic control)
- To set up tracking and location reporting
- Support features
- Advanced settings
- Passwords
- To set up user permissions
- To restore factory settings
- SIM PIN for BGAN
- To save or load a configuration
- Connection watchdog (Link monitoring)
- Terminal watchdog
- Data limits
- Call charges
- Remote management
- Remote control of tracking
- Power save
- To configure data connection types and filters
- Help desk
- Reset button
- Security
- To enter the SIM PIN in the web interface
- Maintenance and troubleshooting
- Specifications
- Command reference
- Conformity
- Glossary
- Index
Chapter 5: Configuration with web interface
98-169085-B Advanced settings 97
Reset button
You can change the function of the Reset button. See Reset button on page 103. Do as
follows:
1. From the Advanced page, select Reset Button.
2. Select the behavior you want for the Reset button.
• Enabled: Short push: The EXPLORER 323 restarts (power cycle) and resets LAN and
WLAN settings, Long push: Reset to factory default.
• Long press disabled: The Reset button will not be able to reset to factory default, but
the short push function (power cycle and reset LAN and WLAN settings) will still work.
• Disabled: The Reset button will not have any function.
3. Click Save.
Security
The EXPLORER 323 internal web server supports HTTPS, which includes encryption of the
exchanged web traffic when accessing the EXPLORER 323 web interface.
By default, the system uses a self-signed certificate, but it also allows you to upload your
own certificate signed by a trusted Certificate Authority.
Do as follows:
1. From the Advanced page select Security.
2. Select Redirect HTTP to HTTPS if you want the EXPLORER 323 to automatically
redirect your HTTP traffic to HTTPS.
3. Select Use uploaded TLS/SSL certificate and click Upload certificate
if you want to
upload and make the system use you own generated SSL certificate. Please note that the
uploaded certificate file (.pem file format) must include the RSA private key used to
generate the certificate:
-----BEGIN CERTIFICATE-----
…
… <your certificate here> …
…
-----END CERTIFICATE-----