User manual

3
Examples
Each section is followed by instructions for keystroke
examples that demonstrate the TI-30XPlus
MultiView™ functions.
Examples assume alldefault settings, as shown in the
Modes section.
Some screen elements may differ from those shown in
thisdocument.
Switching the calculator on and off
& turns on the calculator.% ' turns it off. The
display is cleared, but the history, settings, and
memory are retained.
The APD™ (AutomaticPower Down™) feature turns
off the calculator automatically if no key is pressed for
about 5 minutes. Press & after APD. The display,
pending operations, settings, and memory are
retained.
Display contrast
The brightness and contrast of the display can depend
on room lighting, battery freshness, and viewing angle.
To adjust the contrast:
1. Press and release the % key.
2. Press T U (to darken the screen) or U (to
lighten the screen).
30XPlusMV_OM.flpgl Page 3 Friday, November 14, 2014 1:57 PM