User's Manual
Table Of Contents
- 1 Device Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Power Consumption Summary
- 5.5 General Characteristics
- 5.6 Antenna
- 5.7 1-Mbps GFSK (Bluetooth low energy) – RX
- 5.8 1-Mbps GFSK (Bluetooth low energy) – TX
- 5.9 2-Mbps GFSK (Bluetooth low energy) – RX
- 5.10 2-Mbps GFSK (Bluetooth low energy) – TX
- 5.11 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX
- 5.12 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – TX
- 5.13 24-MHz Crystal Oscillator (XOSC_HF)
- 5.14 32.768-kHz Crystal Oscillator (XOSC_LF)
- 5.15 48-MHz RC Oscillator (RCOSC_HF)
- 5.16 32-kHz RC Oscillator (RCOSC_LF)
- 5.17 ADC Characteristics
- 5.18 Temperature Sensor
- 5.19 Battery Monitor
- 5.20 Continuous Time Comparator
- 5.21 Low-Power Clocked Comparator
- 5.22 Programmable Current Source
- 5.23 DC Characteristics
- 5.24 Thermal Resistance Characteristics for MOH Package
- 5.25 Timing Requirements
- 5.26 Switching Characteristics
- 5.27 Typical Characteristics
- 6 Detailed Description
- 7 Application, Implementation, and Layout
- 8 Device and Documentation Support
- 9 Mechanical Packaging and Orderable Information
- Important Notice
PRODUCTPREVIEW
7
CC2650MOD
www.ti.com
SWRS187 –AUGUST 2016
Submit Documentation Feedback
Product Folder Links: CC2650MOD
Terminal Configuration and FunctionsCopyright © 2016, Texas Instruments Incorporated
4.2 Pin Functions
Table 4-1. Signal Descriptions – MOH Package
PIN NAME PIN NO. PIN TYPE DESCRIPTION
DIO_0 4 Digital I/O GPIO, Sensor Controller
DIO_1 5 Digital I/O GPIO, Sensor Controller
DIO_2 6 Digital I/O GPIO, Sensor Controller, high-drive capability
DIO_3 7 Digital I/O GPIO, Sensor Controller, high-drive capability
DIO_4 8 Digital I/O GPIO, Sensor Controller, high-drive capability
DIO_5/JTAG_TDO 11 Digital I/O GPIO, high-drive capability, JTAG_TDO
DIO_6/JTAG_TDI 12 Digital I/O GPIO, high-drive capability, JTAG_TDI
DIO_7 14 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
DIO_8 15 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
DIO_9 16 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
DIO_10 17 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
DIO_11 18 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
DIO_12 19 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
DIO_13 20 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
DIO_14 21 Digital I/O, Analog I/O GPIO, Sensor Controller, analog
EGP G1, G2, G3, G4 Power Ground – Exposed ground pad
GND 1, 25 — Ground
JTAG_TCKC 10 Digital I/O JTAG TCKC
JTAG_TMSC 9 Digital I/O JTAG TMSC, high-drive capability
NC 2, 24 NC
Not Connected—TI recommends that these pins are left
floating
RESET_N 13 Digital input Reset, active low. No internal pullup
VDDS 22, 23 Power 1.8-V to 3.8-V main chip supply