User's Manual
Table Of Contents
- 1 Device Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Power Consumption Summary
- 5.5 General Characteristics
- 5.6 Antenna
- 5.7 1-Mbps GFSK (Bluetooth low energy) – RX
- 5.8 1-Mbps GFSK (Bluetooth low energy) – TX
- 5.9 2-Mbps GFSK (Bluetooth low energy) – RX
- 5.10 2-Mbps GFSK (Bluetooth low energy) – TX
- 5.11 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX
- 5.12 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – TX
- 5.13 24-MHz Crystal Oscillator (XOSC_HF)
- 5.14 32.768-kHz Crystal Oscillator (XOSC_LF)
- 5.15 48-MHz RC Oscillator (RCOSC_HF)
- 5.16 32-kHz RC Oscillator (RCOSC_LF)
- 5.17 ADC Characteristics
- 5.18 Temperature Sensor
- 5.19 Battery Monitor
- 5.20 Continuous Time Comparator
- 5.21 Low-Power Clocked Comparator
- 5.22 Programmable Current Source
- 5.23 DC Characteristics
- 5.24 Thermal Resistance Characteristics for MOH Package
- 5.25 Timing Requirements
- 5.26 Switching Characteristics
- 5.27 Typical Characteristics
- 6 Detailed Description
- 7 Application, Implementation, and Layout
- 8 Device and Documentation Support
- 9 Mechanical Packaging and Orderable Information
- Important Notice
PRODUCTPREVIEW
36
CC2650MOD
SWRS187 –AUGUST 2016
www.ti.com
Submit Documentation Feedback
Product Folder Links: CC2650MOD
Device and Documentation Support Copyright © 2016, Texas Instruments Incorporated
8.2 Tools and Software
TI offers an extensive line of development tools, including tools to evaluate the performance of the
processors, generate code, develop algorithm implementations, and fully integrate and debug software
and hardware modules.
The following products support development of the CC2650MOD device applications:
Software Tools:
SmartRF Studio 7:
SmartRF Studio is a PC application that helps designers of radio systems to easily evaluate the RF-IC at
an early stage in the design process.
• Test functions for sending and receiving radio packets, continuous wave transmit and receive
• Evaluate RF performance on custom boards by wiring it to a supported evaluation board or debugger
• Can also be used without any hardware, but then only to generate, edit and export radio configuration
settings
• Can be used in combination with several development kits for TI's CCxxxx RF-ICs
Sensor Controller Studio:
Sensor Controller Studio provides a development environment for the CC26xx Sensor Controller. The
Sensor Controller is a proprietary, power-optimized CPU in the CC26xx, which can perform simple
background tasks autonomously and independent of the System CPU state.
• Allows for Sensor Controller task algorithms to be implemented using a C-like programming language
• Outputs a Sensor Controller Interface driver, which incorporates the generated Sensor Controller
machine code and associated definitions
• Allows for rapid development by using the integrated Sensor Controller task testing and debugging
functionality. This allows for live visualization of sensor data and algorithm verification.
IDEs and Compilers:
Code Composer Studio:
• Integrated development environment with project management tools and editor
• Code Composer Studio (CCS) 6.1 and later has built-in support for the CC26xx device family
• Best support for XDS debuggers; XDS100v3, XDS110 and XDS200
• High integration with TI-RTOS with support for TI-RTOS Object View
IAR Embedded Workbench for ARM
• Integrated development environment with project management tools and editor
• IAR EWARM 7.30.3 and later has built-in support for the CC26xx device family
• Broad debugger support, supporting XDS100v3, XDS200, IAR I-Jet and Segger J-Link
• Integrated development environment with project management tools and editor
• RTOS plugin is available for TI-RTOS
For a complete listing of development-support tools for the CC2650MOD platform, visit the Texas
Instruments website at www.ti.com. For information on pricing and availability, contact the nearest TI field
sales office or authorized distributor.