User's Manual
Table Of Contents
- 1 Device Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Power Consumption Summary
- 5.5 General Characteristics
- 5.6 Antenna
- 5.7 1-Mbps GFSK (Bluetooth low energy) – RX
- 5.8 1-Mbps GFSK (Bluetooth low energy) – TX
- 5.9 2-Mbps GFSK (Bluetooth low energy) – RX
- 5.10 2-Mbps GFSK (Bluetooth low energy) – TX
- 5.11 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX
- 5.12 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – TX
- 5.13 24-MHz Crystal Oscillator (XOSC_HF)
- 5.14 32.768-kHz Crystal Oscillator (XOSC_LF)
- 5.15 48-MHz RC Oscillator (RCOSC_HF)
- 5.16 32-kHz RC Oscillator (RCOSC_LF)
- 5.17 ADC Characteristics
- 5.18 Temperature Sensor
- 5.19 Battery Monitor
- 5.20 Continuous Time Comparator
- 5.21 Low-Power Clocked Comparator
- 5.22 Programmable Current Source
- 5.23 DC Characteristics
- 5.24 Thermal Resistance Characteristics for MOH Package
- 5.25 Timing Requirements
- 5.26 Switching Characteristics
- 5.27 Typical Characteristics
- 6 Detailed Description
- 7 Application, Implementation, and Layout
- 8 Device and Documentation Support
- 9 Mechanical Packaging and Orderable Information
- Important Notice
PRODUCTPREVIEW
33
CC2650MOD
www.ti.com
SWRS187 –AUGUST 2016
Submit Documentation Feedback
Product Folder Links: CC2650MOD
Detailed DescriptionCopyright © 2016, Texas Instruments Incorporated
6.12.2 Canada, Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of
the device
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence
L'exploitation est autorisée aux deux conditions suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
IC RF Radiation Exposure Statement:
To comply with IC RF exposure requirements, this device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil et son antenne
ne doivent pas étre co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.
6.13 End Product Labeling
This module is designed to comply with the FCC statement, FCC ID : ZAT26M1. The host system using
this module must display a visible label indicating the following text:
"Contains FCC ID: ZAT26M1"
This module is designed to comply with the IC statement, IC : 451H-26M1. The host system using this
module must display a visible label indicating the following text:
"Contains IC: 451H-26M1"
6.14 Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as shown in this manual.