User's Manual
Table Of Contents
- 1 Device Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Power Consumption Summary
- 5.5 General Characteristics
- 5.6 Antenna
- 5.7 1-Mbps GFSK (Bluetooth low energy) – RX
- 5.8 1-Mbps GFSK (Bluetooth low energy) – TX
- 5.9 2-Mbps GFSK (Bluetooth low energy) – RX
- 5.10 2-Mbps GFSK (Bluetooth low energy) – TX
- 5.11 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX
- 5.12 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – TX
- 5.13 24-MHz Crystal Oscillator (XOSC_HF)
- 5.14 32.768-kHz Crystal Oscillator (XOSC_LF)
- 5.15 48-MHz RC Oscillator (RCOSC_HF)
- 5.16 32-kHz RC Oscillator (RCOSC_LF)
- 5.17 ADC Characteristics
- 5.18 Temperature Sensor
- 5.19 Battery Monitor
- 5.20 Continuous Time Comparator
- 5.21 Low-Power Clocked Comparator
- 5.22 Programmable Current Source
- 5.23 DC Characteristics
- 5.24 Thermal Resistance Characteristics for MOH Package
- 5.25 Timing Requirements
- 5.26 Switching Characteristics
- 5.27 Typical Characteristics
- 6 Detailed Description
- 7 Application, Implementation, and Layout
- 8 Device and Documentation Support
- 9 Mechanical Packaging and Orderable Information
- Important Notice
PRODUCTPREVIEW
2
CC2650MOD
SWRS187 –AUGUST 2016
www.ti.com
Submit Documentation Feedback
Product Folder Links: CC2650MOD
Device Overview Copyright © 2016, Texas Instruments Incorporated
1.2 Applications
• Consumer Electronics
• Mobile Phone Accessories
• Sports and Fitness Equipment
• HID Applications
• Home and Building Automation
• Lighting Control
• Alarm and Security
• Proximity Tags
• Medical
• Remote Controls
• Wireless Sensor Networks
(1) For more information, see Section 9, Mechanical Packaging and Orderable Information.
1.3 Description
The CC2650MOD device is a SimpleLink™ wireless MCU module that targets Bluetooth Smart, ZigBee
®
and 6LoWPAN, and ZigBee
®
RF4CE remote control applications.
The module is based on the CC2650 Wireless MCU, a member of the CC26xx family of cost-effective,
ultra-low power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current
consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in
energy-harvesting applications.
The CC2650MOD contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor
and a rich peripheral feature set that includes a unique ultra-low power sensor controller. This sensor
controller is ideal for interfacing external sensors or for collecting analog and digital data autonomously
while the rest of the system is in sleep mode. Thus, the CC2650MOD device is ideal for applications
within a whole range of products including industrial, consumer electronics, and medical devices.
The CC2650MOD is precertified for operation under the regulations of the FCC, IC, ETSI and ARIB.
These certifications save significant cost and effort for customers when integrating the module into their
products.
The Bluetooth low energy controller and the IEEE 802.15.4 MAC are embedded in the ROM and are partly
running on a separate ARM
®
Cortex
®
-M0 processor. This architecture improves overall system
performance and power consumption and makes more flash memory available.
The Bluetooth Smart and ZigBee stacks are available free of charge from www.ti.com.
Device Information
(1)
PART NUMBER PACKAGE BODY SIZE
CC2650MODAMOH MOH (Module) 16.90 mm × 11.00 mm