User's Manual
Table Of Contents
- 1 Device Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Power Consumption Summary
- 5.5 General Characteristics
- 5.6 Antenna
- 5.7 1-Mbps GFSK (Bluetooth low energy) – RX
- 5.8 1-Mbps GFSK (Bluetooth low energy) – TX
- 5.9 2-Mbps GFSK (Bluetooth low energy) – RX
- 5.10 2-Mbps GFSK (Bluetooth low energy) – TX
- 5.11 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX
- 5.12 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – TX
- 5.13 24-MHz Crystal Oscillator (XOSC_HF)
- 5.14 32.768-kHz Crystal Oscillator (XOSC_LF)
- 5.15 48-MHz RC Oscillator (RCOSC_HF)
- 5.16 32-kHz RC Oscillator (RCOSC_LF)
- 5.17 ADC Characteristics
- 5.18 Temperature Sensor
- 5.19 Battery Monitor
- 5.20 Continuous Time Comparator
- 5.21 Low-Power Clocked Comparator
- 5.22 Programmable Current Source
- 5.23 DC Characteristics
- 5.24 Thermal Resistance Characteristics for MOH Package
- 5.25 Timing Requirements
- 5.26 Switching Characteristics
- 5.27 Typical Characteristics
- 6 Detailed Description
- 7 Application, Implementation, and Layout
- 8 Device and Documentation Support
- 9 Mechanical Packaging and Orderable Information
- Important Notice
PRODUCTPREVIEW
13
CC2650MOD
www.ti.com
SWRS187 –AUGUST 2016
Submit Documentation Feedback
Product Folder Links: CC2650MOD
SpecificationsCopyright © 2016, Texas Instruments Incorporated
(1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
5.12 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – TX
RF performance is specified in a single ended 50-Ω reference plane at the antenna feeding point with T
c
= 25° C,
V
DDS
= 3.0 V, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Output power, highest setting 5 dBm
Output power, lowest setting –21 dBm
Error vector magnitude At maximum output power 2%
Spurious emission conducted
measurement
(1)
f < 1 GHz, outside restricted bands –43
dBm
f < 1 GHz, restricted bands ETSI –65
f < 1 GHz, restricted bands FCC –76
f > 1 GHz, including harmonics –46
(1) Probing or otherwise stopping the XTAL while the DC-DC converter is enabled may cause permanent damage to the device.
(2) Includes initial tolerance of the crystal, drift over temperature, aging and frequency pulling due to incorrect load capacitance. As per
Bluetooth and IEEE 802.15.4 specification
(3) Kick-started based on a temperature and aging compensated RCOSC_HF using precharge injection
5.13 24-MHz Crystal Oscillator (XOSC_HF)
(1)
T
c
= 25°C, V
DDS
= 3.0 V, unless otherwise noted
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Crystal frequency 24 MHz
Crystal frequency tolerance
(2)
–40 40 ppm
Start-up time
(3)
150 µs
5.14 32.768-kHz Crystal Oscillator (XOSC_LF)
T
c
= 25°C, V
DDS
= 3.0 V, unless otherwise noted
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Crystal frequency 32.768 kHz
Crystal frequency tolerance, Bluetooth low
energy applications
–250 250 ppm
(1) Accuracy relatively to the calibration source (XOSC_HF).
5.15 48-MHz RC Oscillator (RCOSC_HF)
T
c
= 25°C, V
DDS
= 3.0 V, unless otherwise noted
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Frequency 48 MHz
Uncalibrated frequency accuracy ±1%
Calibrated frequency accuracy
(1)
±0.25%
Start-up time 5 µs
5.16 32-kHz RC Oscillator (RCOSC_LF)
T
c
= 25°C, V
DDS
= 3.0 V, unless otherwise noted
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Calibrated frequency 32.8 kHz
Temperature coefficient 50 ppm/°C