User's Manual

PRODUCTPREVIEW
10
CC2650MOD
SWRS187 –AUGUST 2016 www.ti.com
Submit Documentation Feedback
Product Folder Links: CC2650MOD
Specifications Copyright © 2016, Texas Instruments Incorporated
5.6 Antenna
T
c
= 25°C, V
DDS
= 3.0 V, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Polarization Linear
Peak Gain 2450 MHz 1.26 dBi
Efficiency 2450 MHz 56.9 %
(1) Numbers given as I/C dB
(2) X / Y, where X is +N MHz and Y is –N MHz
(3) Excluding one exception at F
wanted
/ 2, per Bluetooth Specification
5.7 1-Mbps GFSK (Bluetooth low energy) – RX
RF performance is specified in a single ended 50-Ω reference plane at the antenna feeding point with T
c
= 25°C,
V
DDS
= 3.0 V, f
RF
= 2440 MHz, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Receiver sensitivity BER = 10
–3
–97 dBm
Receiver saturation BER = 10
–3
4 dBm
Frequency error tolerance
Difference between center frequency of the received RF signal
and local oscillator frequency.
–350 350 kHz
Data rate error tolerance –750 750 ppm
Co-channel rejection
(1)
Wanted signal at –67 dBm, modulated interferer in channel,
BER = 10
–3
–6 dB
Selectivity, ±1 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±1 MHz,
BER = 10
–3
7 / 3
(2)
dB
Selectivity, ±2 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±2 MHz,
BER = 10
–3
34 / 25
(2)
dB
Selectivity, ±3 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±3 MHz,
BER = 10
–3
38 / 26
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±4 MHz,
BER = 10
–3
42 / 29
(2)
dB
Selectivity, ±5 MHz or more
(1)
Wanted signal at –67 dBm, modulated interferer at ≥ ±5 MHz,
BER = 10
–3
32 dB
Selectivity, Image frequency
(1)
Wanted signal at –67 dBm, modulated interferer at image
frequency, BER = 10
–3
25 dB
Selectivity,
Image frequency ±1 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at ±1 MHz from
image frequency, BER = 10
–3
3 / 26
(2)
dB
Out-of-band blocking
(3)
30 MHz to 2000 MHz –20 dBm
Out-of-band blocking 2003 MHz to 2399 MHz –5 dBm
Out-of-band blocking 2484 MHz to 2997 MHz –8 dBm
Out-of-band blocking 3000 MHz to 12.75 GHz –8 dBm
Intermodulation
Wanted signal at 2402 MHz, –64 dBm. Two interferers at 2405
and 2408 MHz respectively, at the given power level
–34 dBm
Spurious emissions,
30 MHz to 1000 MHz
Conducted measurement in a 50-Ω single-ended load. Suitable
for systems targeting compliance with EN 300 328, EN 300 440
class 2, FCC CFR47, Part 15 and ARIB STD-T-66
–71 dBm
Spurious emissions,
1 GHz to 12.75 GHz
Conducted measurement in a 50-Ω single-ended load. Suitable
for systems targeting compliance with EN 300 328, EN 300 440
class 2, FCC CFR47, Part 15 and ARIB STD-T-66
–62 dBm
RSSI dynamic range 70 dB
RSSI accuracy ±4 dB