Users Manual

•
Do not remove or damage the labels and the warnings on the tool; do not in any case
make them illegible.
•
Do not remove or tamper with any safety devices the tool is equipped with.
3.3 Operator Safety
The airbags inflate with great force.
In case of explosion, a device located in the airbag's
expansion area will be thrown with force causing severe
damages and injuries.
Safety Measures:
•
Do not place the tool in the airbags' expansion areas.
Some self-diagnosis operations allow you to activate/
deactivate certain actuators and safety systems on the
vehicle.
Failure to reactivate the actuators and safety systems
properly or at all may be a safety risk for the vehicle user.
Safety Measures:
•
In order to avoid injuring people and/or damaging the device or the electronic systems
of the vehicle connected to the device, do not allow unqualified personnel to use the
device.
•
Follow the instructions supplied by the software thoroughly.
The tool was designed to be electrically safe and to work
with specific supply voltage levels.
Improper use may expose the operator to the risk of
electric shock, even though of low intensity.
Safety Measures:
•
Wear adequate personal protective equipment during all the operating phases.
•
Do not handle or touch the tool or any accessories (e.g. cables) with wet hands.
The current used during the operating phases generates
electromagnetic fields (EMF) near the tool.
Even though of low intensity, these fields may interfere
with medical prostheses, such as pacemakers.
Safety Measures:
•
Keep away from the tool after launching the operating phases.
•
If you have a medical prosthesis (e.g.: pacemaker), check with your doctor as to the
appropriateness of using the tool or being near it.
9
en