Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
PROBLEM
POSSIBLE
CAUSE
POSSIBLE SOLUTION
The VCI does not
communicate with
the display unit.
The type of Wi-Fi
network you wish to
connect the VCI to
is not among the
supported ones.
Connect to a type of network among the
supported ones.
For further information see the
COMMUNICATION chapter.
The workshop's
router is set to 5
GHz.
Set the router to 2.4 GHz.
It is impossible to
complete the
Bluetooth pairing
procedure between
the VCI and the
display unit.
The display unit
uses a Bluetooth
2.0 or lower.
Use a display unit with Bluetooth 2.1 or higher.
54