Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
17 TROUBLESHOOTING
For any technical problem contact your retailer/distributor.
Below you will find a list of simple instructions that the customer can carry out without having
to ask for technical assistance.
PROBLEM POSSIBLE CAUSE
POSSIBLE
SOLUTION
The VCI does not turn
on.
The diagnostic cable is not properly
connected.
Connect the cable
properly.
The diagnostic cable is damaged. Replace the cable.
The DIAGNOSIS connector is damaged.
Contact Technical
Assistance.
The power cable is not properly connected
to the PWR connector.
Connect the cable
properly.
The OBD socket is not powered when the
vehicle is off.
Turn on the vehicle.
Use one of the other
power supply
methods indicated in
the manual.
The cigar lighter socket is not powered
when the vehicle is off.
Use one of the other
power supply
methods indicated in
the manual.
The VCI does not
communicate with the
control unit.
The diagnostic cable is not properly
connected.
Connect the cable
properly.
The adapter being used is not correct.
Use the correct
adapter.
The diagnostic cable is damaged. Replace the cable.
The DIAGNOSIS connector is damaged.
Contact Technical
Assistance.
The vehicle is off. Turn on the vehicle.
You are trying to use a communication
mode that is not suitable for the type of
diagnosis.
Use the connection
indicated for the type
of diagnosis you wish
to carry out.
52