Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
Improperly fastening the VCI and diagnostic cable may
cause the VCI itself or the diagnostic cable to fall, which
may be a hindrance to vehicle driving and to the proper
operation of safety devices.
Secure the VCI and the diagnostic cable so as to
minimise their risk of falling.
II.CONFIGURATION
9. Turn on the vehicle (instrument panel on).
10. Start the diagnostic software.
11. Connect the VCI to the display unit via Wi-Fi, Bluetooth or USB.
(If previously configured, the wireless connection is automatic)
The VCI displays the following screen.
12. Select the vehicle on which you wish to operate.
13. Select the control unit you wish to monitor.
14. Start the diagnosis.
15. Create or select a group of favourite parameters that you wish to record.
16. Press the dynamic tests icon.
47
en