Users Manual

For further information, see the software operating manual.
14.3 Pass-Thru
The Pass-Thru standards SAE J2534 and ISO 22900 aim at guaranteeing the possibility to
carry out specific operations for control unit diagnosis and reprogramming using a third-party
VCI, i.e. not proprietary to the vehicle manufacturer.
These operations are possible by using the VCI in combination with a specific software.
The VCI and the software must comply with the requirements of the Pass-Thru standards.
The software is distributed by the vehicle manufacturer through its website or a physical
storage device.
The activation date, the actual availability, the type, the cost
and the procedures regarding the use of the Pass-Thru
service(s) are specifically determined by each manufacturer;
costs, performances and procedures may therefore vary
independently of what TEXA S.p.A establishes.
Each manufacturer imposes specific hardware and operating system requirements for the
PC where its software will be installed.
The PC must be generally equipped with the following:
•
Windows operating system;
•
USB port;
•
serial port;
•
RJ45 port;
•
Wi-Fi;
•
access to the Internet.
43
en