Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
14.2 STANDARD diagnosis
The STANDARD diagnosis is a type of diagnosis based on the diagnostic protocols indicated
in the TECHNICAL FEATURES chapter, except for protocol UDP/TCP ISO 13400 (DoIP).
The following communication modes are available for this type of diagnosis:
•
WiFi
•
Bluetooth
•
USB
For further information see the COMMUNICATION chapter.
Proceed as follows:
1.
Start the diagnostic software.
2.
Select the vehicle you wish to work on.
3.
Select the system you wish to diagnose.
4.
Select the desired variant.
5.
Connect the VCI to the vehicle following the support information provided by the
software.
6.
Select the STANDARD diagnosis.
The VCI displays one of the following screens, based on the selected communication mode.
42