Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
All the ongoing processes through the USB connector are
immediately stopped as soon as the tool detects the cable
connection to the USB DEVICE connector, which may
compromise any ongoing assistance operations (e.g.:
firmware update via USB drive) through the connector USB.
Do not use this connection mode during assistance
operations that require using the connector USB.
The following screen indicates that the VCI is connected to the display unit in the desired
mode and is awaiting commands.
For further information, see the software operating manual.
38