Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
The VCI displays the following screen if no communication modes with the display unit have
been configured.
11.1.3 Power Supply Cable
The VCI can be powered by means of a power supply cable with clamps connected to specific
diagnostic cables.
The image is only an example: the position of the diagnostic
socket and the type of diagnostic cable may change based
on the vehicle being tested.
Always refer to the documentation supplied by the vehicle
manufacturer for the positioning and correct access to the
diagnostic socket.
Always refer to the indications provided by the diagnostic
software for the selection of the diagnostic cable to use.
28