Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
The VCI is being powered by the vehicle battery via the DIAGNOSIS
connector.
The VCI is being powered via the PWR connector.
The VCI is turning off.
The VCI is restarting after a short interruption of the power supply.
For further information see the DIAGNOSIS chapter.
10.4 Other Messages
Other messages that may appear in the VCI display can be about:
Progress status of the VCI firmware update procedure.
VCI restart required.
Error detection (example).
The error indicated in the display refers to an unexpected
behaviour of theVCI.
Contact the Technical Assistance and give the error code for
further information on how to proceed.
24