Users Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR TXT MULTIHUB TECHNICAL MANUAL
- 1 Revision of the Manual
- INTRODUCTION
- 2 LEGEND OF THE SYMBOLS USED
- 3 SAFETY RULES
- 4 OPERATION OF THE RADIO DEVICES
- 5 ENVIRONMENTAL INFORMATION
- 6 NORMATIVE INFORMATION
- 7 NAVIGATOR TXT MULTIHUB
- 8 DESCRIPTION
- 9 TECHNICAL FEATURES
- 10 DISPLAY
- 11 POWER SUPPLY
- 12 POWER ON/OFF
- 13 COMMUNICATION
- 14 DIAGNOSIS
- 15 FIRMWARE UPDATE
- 16 MAINTENANCE
- 17 TROUBLESHOOTING
- 18 LEGAL NOTICES
- ENGLISH
10 DISPLAY
The VCI has a display that acts as the user interface.
The display is divided into areas:
1.
Communication
2.
Battery
3.
Status
10.1 Communication
This area shows the current communication mode with the display unit.
Communication Display
No communication mode configured.
USB
Bluetooth
Wi-Fi in Hotspot mode
(direct connection between VCI and display unit)
Wi-Fi in Station mode
(connection of the VCI to the workshop's Wi-Fi network: the name
of the workshop's Wi-Fi network and the signal strength are
displayed)
Serial number
It appears for a few seconds during the shutdown phase.
For further information see the COMMUNICATION chapter.
10.2 Battery
The VCI displays the charging voltage of the vehicle's battery to which it is connected and
from which it draws power.
The voltage is read via the DIAGNOSIS connector or the PWR connector based on the power
supply mode.
The VCI can be powered by multiple sources at the same time.
22