User's Manual

MT_Navigator_TXB_EN_00 Texa S.p.a.
6/ 22
6. Do not drop, hit or shake the unit, as this might damage irreparably its
internal circuits. Do not use corrosive chemicals, solvents or aggressive
detergents to use NAVIGATOR TXB.
Work Environment
The workplace shall be dry, with sufficient light and proper air circulation.
In particular, the diagnostic operations required to start the engine shall be
carried out in facilities equipped with exhaust gas system.
We remind you that inhaling carbon monoxide (which is odorless) may cause
serious body injuries.
When operating on engines or other parts of the motorcycles remember
the following:
- Wear suitable clothing and keep a behaviour fit to prevent accidents.
- Before operating, make sure that the motorcycle's gearbox is placed in
neutral.
- Protect your face, hands and feet, and avoid contact with hot surfaces,
such as spark plugs, exhaust pipes, radiators, cooling system pipe
fittings.
- Do not smoke and do not light flames when working on the motorcycle.
- Make sure that all electrical connections are insulated and tight.
- Do not stare into the intake pipe of the carburettor from a close distance
when the engine is running.
- Keep hands and hair away from parts in motion.
- Never wear ties, loose clothing, bracelets and watches when working on
a motorcycle, especially when the engine is running.
- Keep away from the fan. The cooling fan is controlled by a thermal
circuit-breaker depending on the coolant temperature: therefore, please
disconnect the fan cable every time you work on a still hot engine , in
order to avoid that the fan starts suddenly even if the engine is stopped.
- Do not pour fuel directly into the carburettor to facilitate the engine start-
up.
- Do not unscrew the radiator's cap before the engine temperature has
decreased together with the cooling system pressure.
- Do not touch high voltage wiring when the engine is running.
DANGER
!
DANGER
!
WARNING