User's Manual

MT_Navigator_TXB_EN_00 Texa S.p.a.

5/ 22

General Rules for the Operator's Safety

This product was designed and developed to be used by specializing

technical personnel in the field of automotive, such as electricians,

mechanics, technicians and engineers specializing in automotive. Never allow

this equipment to be used by unqualified personnel in order to prevent

personal injuries and damage to the tool or to the electronic system of the

motorcycle the tool is connected to.

The workplace shall be dry, with sufficient light and proper air circulation.

In particular, the diagnostic operations required to start the engine shall be

carried out in facilities equipped with exhaust gas system.

We remind you that inhaling carbon monoxide (which is odorlesss) may

cause serious body injuries.

1. Unless otherwise specified in the technical characteristics of the devices

which can be used, the solution may only be used on vehicles featuring

12 Volt DC supply and frame connected to the negative pole.

2. Place the unit so to guarantee its proper ventilation. Do not place the unit

close to heat sources or high temperature surfaces and/or components.

3. The electromagnetic compatibility tests performed on the product

guarantee that it is compatible with the technologies normally used on

the vehicles (e.g., engine control, ABS); however, in the event of

malfunction, it is necessary to contact the manufacturer of the

motorcycle.

4. Do not wet NAVIGATOR TXB, as rain, moisture, and any liquids or

condensation might damage its electronic circuits.

5. Do not open the NAVIGATOR TXB device. Any operations carried out by

unqualified personnel might damage the device itself.

DANGER

WARNING