User's Manual

MT_Navigator_TXB_EN_00 Texa S.p.a.
20/ 22
3 HOW TO CONNECT TO THE MOTORCYCLE
WARNING
In order to connect to the motorcycle's control unit, it is necessary to
have the special termination cables contained in the suitcases Bike
Standard Cables and Bike Optional Cables
To connect to the motorcycle, it is first of all necessary to locate the control
unit's connector on the basis of the information (picture or movie) provided by
the operating program in use.
The location and type of connector on the motorcycle varies depending on
make and model. For this reason, the program provides all the necessary
information.
Strictly heed the instructions provided by the program.
If not otherwise specified, NAVIGATOR TXB will be supplied directly by the
connection to the diagnostic port of the motorcycle; the green LED will light
up indicating a correct supply.
At this point, it is possible to continue with the analysis of the electronic
system under examination, by using the functions and procedures made
available by the auto-diagnosis program in use. Please refer to the specific
manual relating to the program in use.
WARNING