User's Manual

MT_NAVIGATOR_TXS_EN_00 Texa S.p.a.

5/ 22

General Rules for the Operator's Safety

This product was designed and developed to be used by specializing

technical personnel in the field of automotive, such as electricians,

mechanics, technicians and engineers specializing in automotive. Never allow

this equipment to be used by unqualified personnel in order to prevent

personal injuries and damage to the tool or to the Vehicle’s electronic

systems to which the tool is connected to.

The workplace shall be dry, with sufficient light and proper air circulation.

In particular, the diagnostic operations requiring to start the engine shall be

carried out in facilities equipped with exhaust gas system.

We remind you that inhaling carbon monoxide (which is odourless) may

cause serious body injuries.

1. Unless otherwise specified in the technical characteristics of the usable

peripherals, the solution should only be used on vehicles featuring 12 /

24 Volt DC supply and frame connected to the negative pole.

2. Do not place the interfaces possibly used to connect NAVIGATOR TXS

to the vehicle over the airbag or next to the airbag deployment area. The

airbags tend to deploy with great force. If placed within the airbag

deployment area and the airbag deploys, the unit might be thrown away

with violence causing serious injuries to the people in the vehicle.

3. Place the unit so to guarantee proper ventilation. Do not place the unit

close to heat sources or high temperature surfaces and/or components.

4. The electromagnetic compatibility tests performed on the product

guarantee that it is compatible with the technologies normally used on

the vehicles (e.g., engine control, ABS, airbags, air conditioner,

navigator, radio, Hi-Fi system) however, should any failure occur, it will

be necessary to contact the vehicle's dealer.

5. Do not wet NAVIGATOR TXS, as rain, moisture, and any liquid or

condensation might damage its electronic circuits.

DANGER

WARNING