User's Manual

MT_NAVIGATOR_TXS_EN_00 Texa S.p.a. 21/ 22
4 CONNECTION TO THE DISPLAY UNIT
(Communication Type)
4.1 Bluetooth Communication
If cables are not plugged in the USB Device connector, communication
directly occurs in Bluetooth mode.
Simply select and activate this communication mode in the program installed
on the displaying palmtop.
4.2 USB Communication
An optional communication mode is the one providing to use a cable for the
connection to the USB port of the palmtop, if existing.
Simply connect, by means of a specific cable, the USB Device port to a USB
port on the displaying unit, and then select this communication mode in the
installed program.