User's Manual
Table Of Contents
- /
- ENGLISH
- NAVIGATOR NANO TECHNICAL MANUAL
- Introduction
- ABOUT THE MANUAL
- 1 LEGEND OF THE SYMBOLS USED
- 2 GLOSSARY
- 3 GENERAL SAFETY REGULATIONS
- 4 NAVIGATOR NANO USER SAFETY
- 5 ENVIRONMENTAL INFORMATION
- 6 OPERATION OF THE TOOL RADIO DEVICES
- 7 NORMATIVE INFORMATION
- 8 INTRODUCTION
- 9 DESCRIPTION
- 10 HOW TO USE THE DEVICE
- 11 MAINTENANCE
- 12 SOLUTIONS TO PROBLEMS
- 13 LEGAL NOTICES
- ENGLISH
JACK CONNECTOR
The device can be powered via a suitable cable that can be
connected directly to the car adapter.
•
Device
•
Car adapter
•
Battery clamps (with jack connector)
Proceed as follows:
1.
Connect the device to the adapter.
2.
Connect the clamps to the adapter.
3.
Connect the clamps to the vehicle battery.
The green LED remains on (does not flash) if the device is
being powered properly.
In this case the green LED on the junction box of the clamps
will also turn on.
37
en