User's Manual

General safety precautions for operators
This product was designed and developed for use by specialised technical
personnel in the automotive sector, including motor vehicle specialised
electricians, mechanics, technicians and engineers.
Unqualified personnel must not be allowed to use the equipment to prevent
injury to people and/or damage to the instrument and/or to the electronic
systems of the vehicle to which the instrument is connected.
Before putting into function, connecting and utilising NAVIGATOR Wireless, it
is absolutely necessary to carefully read and understand the safety,
installation and use instructions in this manual.
Knowledge of and compliance with the operating conditions and procedures
described in the manual allow you to work safely for your own physical well-
being and for the integrity of the instrument and vehicles on which it is
operating.
1. The NAVIGATOR Wireless system must be used only on vehicles
supplying 12 Volt direct current and chassis connected to the negative
terminal.
2. Never position the device in the area over an airbag or near an airbag in
its expansion area. Airbags deploy with great force. If positioned in an
airbag expansion area when an airbag is deployed, the device could be
thrown with great force and seriously injure occupants aboard.
3. Arrange the device so that correct ventilation is ensured. Do not position
the device near sources of heat or hot surfaces and/or parts.
4. Make sure that the installation aboard does not interfere with the vehicle
controls, specifically brakes, steering and safety devices in general.
5. NAVIGATOR Wireless was tested for electromagnetic compatibility with
the technology commonly employed in vehicles (e.g. engine control,
ABS, airbag, climate control, navigator, sound system and hi-fi systems).
Contact the vehicle retailer in the event of malfunctioning.
6. Keep NAVIGATOR Wireless dry: rain, humidity, all fluids and
condensation may damage the electronic circuits.
7. Do not open the NAVIGATOR Wireless device. Interventions performed
by unspecialised personnel may damage the device.
8. Do not drop, knock or shake the device: the internal circuits could be
damaged beyond repair.
9. Do not use corrosive chemical products, solvents or aggressive
detergents to clean the NAVIGATOR Wireless device.
Working environment
The working area must be dry, ventilated and sufficiently illuminated.
In particular, all testing with running engine must take place in areas
equipped with extraction fans.
MT_NAVIGATOR Wireless_eng_00 Texa S.p.A. 36/122