User's Manual
Table Of Contents
- /
- ENGLISH
- DATAPLUG TECHNICAL MANUAL
- Review of the Manual
- INTRODUCTION
- 1 ABOUT THE MANUAL
- 2 LEGEND OF THE SYMBOLS USED
- 3 GLOSSARY
- 4 SAFETY RULES
- 5 OPERATION OF THE RADIO DEVICES
- 6 REGULATORY INFORMATION
- 7 DATAPLUG
- 8 DESCRIPTION
- 9 POWER SUPPLY
- 10 LOCATION OF THE DIAGNOSTIC SOCKET
- 11 INSTALLATION AND CONFIGURATION
- 12 USE
- 13 MAINTENANCE
- 14 BLINK CODES
- 15 TROUBLESHOOTING
- 16 TECHNICAL FEATURES
- 17 ENVIRONMENTAL INFORMATION (For the European Union)
- ENGLISH
17 ENVIRONMENTAL INFORMATION (For the European
Union)
This product may contain substances that can be hazardous to the environment
or to human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of
these substances and to improve the use of natural resources.
Electrical and electronic equipments should never be disposed of in the usual
municipal waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and in this page, remind you
of the need to dispose of properly the product at the end of its life.
In this way it is possible to prevent that a not specific treatment of the substances
contained in these products, or their improper use, or improper use of their parts
may be hazardous to the environment or to human health. Furthermore this
helps to recover, recycle and reuse many of the materials used in these
products.
For this purpose the electrical and electronic equipment producers and
distributors set up proper collection and treatment systems for these products.
At the end of life your product contact your distributor to have information on
the collection arrangements.
When buying this new product your distributor will also inform you of the
possibility to return free of charge another end of life equipment as long as it is
of equivalent type and has fulfilled the same functions as the supplied
equipment.
A disposal of the product different from what described above will be liable to
the penalties prescribed by the national provisions in the country where the
product is disposed of.
We also recommend you to adopt more measures for environment protection:
recycling of the internal and external packaging of the product and disposing
properly used batteries (if contained in the product).
With your help it is possible to reduce the amount of natural resources used to
produce electrical and electronic equipments, to minimize the use of landfills for
the disposal of the products and to improve the quality of life by preventing that
potentially hazardous substances are released in the environment.
29
en